TCNISO Embedded Telnet Server login: password: Welcome to the Broadcom CLI (command-line interpreter). To access the native VxWorks shell, type 'shell'. CM> RNG-RSP Adj: tim=0 power=0 freq=0 Stat=Success 0x000029a4 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigStationMaint: (CmDocsisCtlThread) config is kPeriodicRanging mode. ****************************************** UPSTREAM STATUS ****************************************** Upstream Status = UP Upstream Channel = 5 Upstream Frequency = 24784000 Hz Upstream Power = 41 dBmV Ranging SID = 0xa07 Upstream Symbol Rate = 2560000 sym/sec ****************************************** Starting IP Initialization with DHCP... DHCPc: Waiting 1 seconds before sending Discover; client id htype=1, value=00:18:68:0b:9f:46 Logging event: T500.0 Acquired Upstream .......... SUCCESS v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" CM> DHCPc: Sending Discover packet; client id htype=1, value=00:18:68:0b:9f:46 DHCPc: Received an Offer from DHCP server 00:00:00:00:00:02 (10.73.64.1); lease client id htype=1, value=00:18:68:0b:9f:46 CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:18:68:0b:9f:46 DHCPc: Sending Request packet; client id htype=1, value=00:18:68:0b:9f:46 DHCPc: Received an Ack from DHCP server 00:00:00:00:00:02 (10.73.64.1); lease client id htype=1, value=00:18:68:0b:9f:46 Current IP address is default 169.0.0.1; removing existing route... 0x0000357a ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ConfigureLeaseImpl: (IP Stack1 HalIf) Configuring IP stack 1: IP Address = 10.73.69.196 Subnet Mask = 255.255.192.0 Router = 10.73.64.1 DHCP completed successfully! DHCP Settings: Client Id = htype=1, value=00:18:68:0b:9f:46 State = Bound (4) Static Lease = false AutoConfig Mode = IP, Subnet and Router XID = 0x59e2 Number of Tries = 0 Max Discover Tries = 6 Max Request Tries = 6 DHCP server MAC addr = 00:00:00:00:00:02 My offered IP address = 10.73.69.196 (1) Subnet Mask = 255.255.192.0 (3) Router IP address = 10.73.64.1 (54) DHCP Server IP address = 200.61.236.7 (82) Relay Agent IP address = 10.73.64.1 TFTP Server IP address = 10.73.64.1 CM Configuration file = 'cmd256u64c5d10.cfg' (2) UTC Time Offset = 0 seconds (4) Time Server IP address = 200.61.236.7 (7) Log Server IP address = 200.61.236.6 (51) Lease time = 2322932 seconds (58) T1 (renew) = 1161466 seconds (59) T2 (rebind) = 2032565 seconds Lease is infinite = false CmSnmpAgent::IpAddressAcquiredEvent for SB5100 CM Agent IP addr = 10.73.69.196 SB5100 CM Agent ConfigIp: Ip=10.73.69.196, Subnet=255.255.192.0, Gateway=10.73.64.1 CM> Starting Time Of Day... 0x0000396c ['CmDocsisIpThread' id=0x807c3b50] BcmDocsisTimeOfDayThread::SetTodServerIpAddress: (Time Of Day Thread) ToD servers: 200.61.236.7 Connecting to ToD server 200.61.236.7... Sending UDP ToD request to server... Logging event: DHCP WARNING - Non-critical field invalid in response. Logging event: D511.0 Retrieved DHCP .......... SUCCESS v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" UTC returned by ToD server 3417041550; UTC offset 0 Current system time -> SUN APR 13 02:12:30 2008 System start time -> SUN APR 13 02:12:16 2008 Starting Tftp of configuration file... Opening file 'cmd256u64c5d10.cfg' on 10.73.64.1... 1.2.1.69.1.2.1.5.12 to 3 Not setting 1.3.6.1.2.1.69.1.2.1.6.12 to @ Not setting 1.3.6.1.2.1.69.1.2.1.7.12 to 4 Invalid TLV-11's: 1 wrong values, 0 duplicate sets. But since we're in FACTORY mode we'll allow it. MAX CPE per CM is being set to 6 Sending a REG-REQ to the CMTS... Time Of Day completed... BcmSnmpAgent::SystemTimeChangeEvent for SB5100 CM Agent tftpInit: Tftp outbound interface flag (1024) Connected to 10.73.64.1 [69] mode set to octet. getting from 10.73.64.1:cmd256u64c5d10.cfg [octet] tftpSend: Attempt #(1) Backoff (2) tickCount (1502) blkReply (1) Tftp read ZERO bytes, may have reached end of file. Config file was read! IP Initialization completed... Test of 1.3.6.1.2.1.69.1.2.1.7.11 to 4 failed w/ error code INCONSISTENT_VALUE Not setting 1.3.6.1.2.1.69.1.6.4.1.2.40 to 4 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.40 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.40 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.40 to 17 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.40 to 1900 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.40 to 1900 Not setting 1.3.6.1.2.1.69.1.6.4.1.2.45 to 4 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.45 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.45 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.45 to 6 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.45 to 25 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.45 to 25 Not setting 1.3.6.1.2.1.69.1.2.1.2.11 to 200.61.236.0 Not setting 1.3.6.1.2.1.69.1.2.1.3.11 to 255.255.255.0 Not setting 1.3.6.1.2.1.69.1.2.1.4.11 to @Nmat2357#JgH Not setting 1.3.6.1.2.1.69.1.2.1.5.11 to 3 Not setting 1.3.6.1.2.1.69.1.2.1.6.11 to @ Not setting 1.3.6.1.2.1.69.1.2.1.2.12 to 200.61.236.6 Not setting 1.3.6.1.2.1.69.1.2.1.3.12 to 255.255.255.255 Not setting 1.3.6.1.2.1.69.1.2.1.4.12 to @Nmat2357#JgH Not setting 1.3.6.Received a REG-RSP message from the CMTS... 0x00003b38 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) We registered with a DOCSIS 1.0 config file! Adding DOCSIS 1.0 CoS Settings for SID 0xa07 Class Of Service Settings: SID = 0xa07 Max Us Burst = 3000 bytes Max Us Rate = 65536 bits per second Max Bucket size = 16384 bits Bits In Bucket = 16384 Last Bucket Update Time = 15160 ms Last Bucket Flush Time = 15160 ms Packet Delay Time = 0 ms Global CONCAT has been enabled for all upstream queues. The CONCAT threshold is set to 2 packets (64 packets max). Fragmentation is NOT enabled. Registration complete! Process CVC 0x00003b38 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ProcessCVC: (CmDocsisCtlThread) WARNING - No CVC included in config file; software upgrade can't be performed! 0x00003b42 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ProcessCVC: (CmDocsisCtlThread) ERROR - Config file does not include a CVC that validates properly! DOCSIS CoS/QoS rate shaping enable is now true CmSnmpAgent::CmOperationalEvent for SB5100 CM Agent CmSnmpAgent operating in 1.0 mode, including docsBpi, excluding docsQos +++ No DH kickstart profiles or snmpCommunityTable entries installed. We will operate in NMACCESS mode. SB5100 CM Agent setting V1/V2 view to docsisNmAccessView SB5100 CM Agent enabling management. v1Trap: coldStartTrap 10.73.69.196->192.168.100.10:226, cmty="public" SB5100 CM Agent sending deferred traps... Done w/ deferred traps. v1Trap: linkUpTrap(if2) 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: linkUpTrap(if2) 10.73.69.196->192.168.100.10:226, cmty="public" SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView 0x00003b4c ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchBpkm: (CmDocsisCtlThread) BPKM disabled via manufacturing setting. Enabling network access for all CPE ports. mot_scanList: Writing to Flash! 0x00003b88 ['CmDocsisCtlThread' id=0x807bda80] BcmDocsisCmHalIf::ConfigOperational: (DOCSIS CableModem HalIf) Running IGMP in DOCSIS 1.0 mode! BcmCmDocsisStatusEventCodes::kCmIsOperational 0x00003b92 ['IGMP Thread' id=0x807b7580] BcmIgmpThread::Starting Igmp Thread...: (IGMP Thread) Stopping DHCP server... Leaving standby mode! Stopping DHCP server... Logging event: TLV-11 - Illegal Set operation failed Sending syslog message from IF 1 to 192.168.100.10: <130> CABLEMODEM [DOCSIS]: <73040200> TLV-11 - Illegal Set operation failed NonVolDeviceDriver::NonVolDriverWrite: WARNING - Dynamic NonVol is 'full' - no more free segments; need to erase and start over! NonVolDeviceDriver::NonVolDriverWrite: WARNING - Erasing flash region; a power failure here will cause settings to be lost! Logging event: D509.0 Retrieved TFTP Config cmd256u64c5d10.cfg SUCCESS Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2223898626> D509.0 Retrieved TFTP Config cmd256u64c5d10.cfg SUCCESS v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public" Logging event: D507.0 Retrieved Time....... SUCCESS Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2223898625> D507.0 Retrieved Time....... SUCCESS v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public" SB5100 CM Event Log sending deferred async messages... Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2223898630> T501.0 Acquired Downstream (543000000 Hz)........ SUCCESS v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public" Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2223898629> T500.0 Acquired Upstream .......... SUCCESS v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public" Sending syslog message from IF 1 to 192.168.100.10: <130> CABLEMODEM [DOCSIS]: <68000300> DHCP WARNING - Non-critical field invalid in response. Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2223898627> D511.0 Retrieved DHCP .......... SUCCESS v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public" Done w/ deferred msgs Logging event: I500.0 Registration Completed Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2223898628> I500.0 Registration Completed v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public" Logging event: M569.1 Standby mode disabled Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2223898633> M569.1 Standby mode disabled v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: cmTrapLog 10.73.69.196->192.168.100.10:226, cmty="public"