Forcing to download Cfg file: R4-MOTO v1Trap: docsDevCmTODFailTrap 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: docsDevCmTODFailTrap 10.19.191.11->192.168.100.10:226, cmty="public" tftpInit: Tftp outbound interface flag (1024) Connected to 209.122.64.91 [69] mode set to octet. getting from 209.122.64.91:R4-MOTO [octet] tftpSend: Attempt #(1) Backoff (2) tickCount (20787) blkReply (1) CM>  445 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.12 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.12 to 3 Not setting 1.3.6.1.2.1.69.1.6.4.1.6.12 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.7.12 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.8.12 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.9.12 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.10.12 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.12 to 17 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.12 to 445 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.12 to 445 Invalid TLV-11's: 8 wrong values, 0 duplicate sets. But since we're in FACTORY mode we'll allow it. MAX CPE per CM is being set to 2 Sending a REG-REQ to the CMTS... Tftp read ZERO bytes, may have reached end of file. Config file was read! IP Initialization completed... Test of 1.3.6.1.2.1.69.1.6.4.1.2.3 to 4 failed w/ error code INCONSISTENT_VALUE Test of 1.3.6.1.2.1.69.1.6.4.1.2.4 to 4 failed w/ error code INCONSISTENT_VALUE Test of 1.3.6.1.2.1.69.1.6.4.1.2.5 to 4 failed w/ error code INCONSISTENT_VALUE Test of 1.3.6.1.2.1.69.1.6.4.1.2.8 to 4 failed w/ error code INCONSISTENT_VALUE Test of 1.3.6.1.2.1.69.1.6.4.1.2.9 to 4 failed w/ error code INCONSISTENT_VALUE Test of 1.3.6.1.2.1.69.1.6.4.1.2.10 to 4 failed w/ error code INCONSISTENT_VALUE Test of 1.3.6.1.2.1.69.1.6.4.1.2.11 to 4 failed w/ error code INCONSISTENT_VALUE Test of 1.3.6.1.2.1.69.1.6.4.1.2.12 to 4 failed w/ error code INCONSISTENT_VALUE Not setting 1.3.6.1.2.1.69.1.6.3.0 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.3 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.3 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.6.3 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.7.3 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.8.3 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.9.3 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.10.3 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.3 to 6 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.3 to 80 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.3 to 80 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.4 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.4 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.6.4 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.7.4 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.8.4 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.9.4 to 207.172.4.99 Not setting 1.3.6.1.2.1.69.1.6.4.1.10.4 to 255.255.255.255 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.4 to 6 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.4 to 25 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.4 to 25 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.5 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.5 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.6.5 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.7.5 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.8.5 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.9.5 to 207.172.157.100 Not setting 1.3.6.1.2.1.69.1.6.4.1.10.5 to 255.255.255.255 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.5 to 6 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.5 to 25 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.5 to 25 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.8 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.8 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.6.8 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.7.8 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.8.8 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.9.8 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.10.8 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.8 to 6 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.8 to 25 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.8 to 25 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.9 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.9 to 3 Not setting 1.3.6.1.2.1.69.1.6.4.1.6.9 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.7.9 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.8.9 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.9.9 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.10.9 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.9 to 6 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.9 to 135 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.9 to 139 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.10 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.10 to 3 Not setting 1.3.6.1.2.1.69.1.6.4.1.6.10 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.7.10 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.8.10 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.9.10 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.10.10 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.10 to 17 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.10 to 135 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.10 to 139 Not setting 1.3.6.1.2.1.69.1.6.4.1.3.11 to 1 Not setting 1.3.6.1.2.1.69.1.6.4.1.5.11 to 3 Not setting 1.3.6.1.2.1.69.1.6.4.1.6.11 to 2 Not setting 1.3.6.1.2.1.69.1.6.4.1.7.11 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.8.11 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.9.11 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.10.11 to 0.0.0.0 Not setting 1.3.6.1.2.1.69.1.6.4.1.11.11 to 6 Not setting 1.3.6.1.2.1.69.1.6.4.1.14.11 to 445 Not setting 1.3.6.1.2.1.69.1.6.4.1.15.11 toLogging event: TLV-11 - Illegal Set operation failed Sending syslog message from IF 1 to 192.168.100.10: <130> CABLEMODEM [DOCSIS]: <73040200> TLV-11 - Illegal Set operation failed Received a REG-RSP message from the CMTS... 0x00032e6a ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RegRspMsgEvent: (CmDocsisCtlThread) ERROR - REG-RSP response code NOT ok! rsp code = 2 (kRejUnrecognizedConfigSetting) 0x00032e6a ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::SyncRestartErrorEvent: (CmDocsisCtlThread) Logging event: D509.0 Retrieved TFTP Config RF-1-MOTO SUCCESS Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2223898626> D509.0 Retrieved TFTP Config RF-1-MOTO SUCCESS v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: cmTrapLog 10.19.191.11->192.168.100.10:226, cmty="public" Logging event: Registration failure, re-scanning downstream Sending syslog message from IF 1 to 192.168.100.10: <134> CABLEMODEM [Motorola Corporation]: <2436694040> Registration failure, re-scanning downstream Deleting DOCSIS 1.0 CoS Settings for SID 0x683 0x00032f32 ['CmDocsisCtlThread' id=0x807bda80] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules... Stopping DHCP/ToD/TFTP (client requested)... CM> Connecting to ToD server 209.122.64.91... Sending UDP ToD request to server... 0x000333f6 ['Time Of Day Thread' id=0x807c55d0] BcmDocsisTimeOfDayThread::HandleToD: (Time Of Day Thread) WARNING - Timed out waiting for a response from the ToD server. Waiting 2000 ms before trying this server again... Logging event: ToD request sent- No Response received Sending syslog message from IF 1 to 192.168.100.10: <131> CABLEMODEM [DOCSIS]: <68000403> ToD request sent- No Response received v1Trap: docsDevCmTODFailTrap 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: docsDevCmTODFailTrap 10.19.191.11->192.168.100.10:226, cmty="public" CM> Connecting to ToD server 209.122.64.91... Sending UDP ToD request to server... CM> 0x00033cc0 ['Time Of Day Thread' id=0x807c55d0] BcmDocsisTimeOfDayThread::HandleToD: (Time Of Day Thread) WARNING - Timed out waiting for a response from the ToD server. Waiting 2000 ms before trying this server again... Logging event: ToD request sent- No Response received Sending syslog message from IF 1 to 192.168.100.10: <131> CABLEMODEM [DOCSIS]: <68000403> ToD request sent- No Response received v1Trap: docsDevCmTODFailTrap 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: docsDevCmTODFailTrap 10.19.191.11->192.168.100.10:226, cmty="public" CM> 0x00034490 ['Time Of Day Thread' id=0x807c55d0] BcmDocsisTimeOfDayThread::HandleTod: (Time Of Day Thread) WARNING - Exceeded max number of ToD retries for all servers. Waiting for period timer to expire... 0x00034490 ['Time Of Day Thread' id=0x807c55d0] BcmDocsisTimeOfDayThread::HandleTod: (Time Of Day Thread) WARNING - Period timer expired. Trying ToD again... Aborted ToD acquisition due to client request... The ToD thread was stopped. DHCPc: Releasing the lease with client id htype=1, value=00:11:1a:1c:30:dc DHCPc: Sending Release packet; client id htype=1, value=00:11:1a:1c:30:dc 0x00034490 ['DHCP Client Thread' id=0x807c8fa0] BcmDhcpClientIf::SendDhcpPacket: (DHCP ClientIf for IP Stack1) WARNING - Failed to send packet! 0x00034490 ['DHCP Client Thread' id=0x807c8fa0] BcmDhcpClientIf::SendRelease: (DHCP ClientIf for IP Stack1) WARNING - Failed to create/send Release packet! Oh, well, no biggie... 0x00034490 ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) Removing lease IP address 10.19.191.11 from IP stack 1 0x00034490 ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::RemoveLeaseImpl: (IP Stack1 HalIf) This is the last address on the stack; shutting the stack down. 0x00034490 ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf) Shutting down IP stack 1 0x00034490 ['DHCP Client Thread' id=0x807c8fa0] BcmVxIpHalIf::ShutdownIpStackImpl: (IP Stack1 HalIf) There are 1 IP addresses registered with this stack. Logging event: ToD request sent- No Response received Sending syslog message from IF 1 to 192.168.100.10: <131> CABLEMODEM [DOCSIS]: <68000403> ToD request sent- No Response received 0x0003449a ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65 docsDevEvSyslog::Send - sendto failure -1 v1Trap: docsDevCmTODFailTrap 192.168.100.1->192.168.100.10:226, cmty="public" v1Trap: docsDevCmTODFailTrap 10.19.191.11->192.168.100.10:226, cmty="public" AgentSendV1Trap - sendto failure 0041 BcmSnmpAgent::RestartPendingEvent for SB5100 CM Agent SB5100 CM Agent setting V1/V2 view to SB5100 CM Agent sending deferred traps... Done w/ deferred traps. SB5100 CM Agent ConfigIp: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0 v1Trap: linkDownTrap(if2) 192.168.100.1->192.168.100.10:226, cmty="public" CmSnmpAgent::ResetMibDefaults not restting due to factory mode SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView Non-Vol Settings successfully written to the device. 0x0003458a ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread) 0x00034594 ['Scan Downstream Thread' id=0x807d69c0] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Downstream Channel scan stopped! SB5100 CM Event Log sending deferred async messages... 0x000345a8 ['Scan Downstream Thread' id=0x807d69c0] BcmVendorCmDownstreamScanThread::ThreadMain: (Scan Downstream Thread) Scanning for a Downstream Channel... mot_scanList: Setting override freq @ 0 Go back to 1st favorite Attempting Downstream FEC lock @ freq= 853792600 Hz, QAM64 Done w/ deferred msgs Attempting Downstream FEC lock @ freq= 91754500 Hz, QAM64 Sending syslog message from IF 1 to 192.168.100.10: <130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 0x0003465c ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65 docsDevEvSyslog::Send - sendto failure -1 Attempting Downstream FEC lock @ freq= 97754800 Hz, QAM64 Sending syslog message from IF 1 to 192.168.100.10: <130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 0x00034710 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65 docsDevEvSyslog::Send - sendto failure -1 Attempting Downstream FEC lock @ freq= 103755100 Hz, QAM64 Sending syslog message from IF 1 to 192.168.100.10: <130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 0x000347c4 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65 docsDevEvSyslog::Send - sendto failure -1 Attempting Downstream FEC lock @ freq= 109755400 Hz, QAM64 Sending syslog message from IF 1 to 192.168.100.10: