Index: config/platforms/asus_a8v-e_se.conf
===================================================================
--- config/platforms/asus_a8v-e_se.conf	(Revision 0)
+++ config/platforms/asus_a8v-e_se.conf	(Revision 0)
@@ -0,0 +1,53 @@
+# Support for the ASUS A8V-E SE board
+
+#### Platform configuration
+
+CC=gcc
+STRIP=strip
+AS=as
+
+ifeq ($(CONFIG_TARGET_64BIT),y)
+TARGET_ARCH=x86_64
+CFLAGS_platform =
+else
+TARGET_ARCH=i686
+CFLAGS_platform =
+endif
+
+# Targets
+
+# TODO
+# KERNEL_MK=$(PACKAGE_DIR)/kernel/asus_a8v-e_se.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/asus_a8v-e_se.mk
+
+# kernel configuration (for LAB)
+
+# TODO
+# KERNEL_VERSION=2.6.22.2
+# 
+# ifeq ($(CONFIG_TARGET_64BIT),y)
+# $(error You must specify a kernel configuration for 64 bit)
+# else
+# KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-asus_a8v-e_se
+# endif
+
+# TODO
+#UCLIBC_ARCH=$(TARGET_ARCH)
+
+# Etherboot configuration
+# TODO
+# ETHERBOOT_ARCH=i386
+
+# coreboot configuration
+
+COREBOOT_VENDOR=asus
+COREBOOT_BOARD=a8v-e_se
+CBV2_CONFIG=Config.lb
+CBV2_PAYLOAD_FILE_EXT=elf
+CBV2_TDIR=asus_a8v-e_se
+CBV2_TAG=3240
+
+# FILO configuration
+
+FILO_CONFIG=asus_a8v-e_se-Config
+
Index: config/platforms/platforms.conf
===================================================================
--- config/platforms/platforms.conf	(Revision 144)
+++ config/platforms/platforms.conf	(Arbeitskopie)
@@ -12,6 +12,7 @@
 PLATFORM-$(CONFIG_PLATFORM_DB800) = db800.conf
 PLATFORM-$(CONFIG_PLATFORM_DBE61) = dbe61.conf
 PLATFORM-$(CONFIG_PLATFORM_GA_M57SLI_S4) = m57sli.conf
+PLATFORM-$(CONFIG_PLATFORM_ASUS_A8V_E_SE) = asus_a8v-e_se.conf
 PLATFORM-$(CONFIG_PLATFORM_TYAN_S2881) = tyan-s2881.conf
 PLATFORM-$(CONFIG_PLATFORM_TYAN_S2882) = tyan-s2882.conf
 PLATFORM-$(CONFIG_PLATFORM_TYAN_S2891) = tyan-s2891.conf
Index: config/platforms/Config.in
===================================================================
--- config/platforms/Config.in	(Revision 144)
+++ config/platforms/Config.in	(Arbeitskopie)
@@ -12,6 +12,10 @@
 config VENDOR_ARTEC_GROUP
 	bool "Artec Group"
 
+config VENDOR_ASUS
+	bool "ASUS"
+	depends COREBOOT_V2
+
 config VENDOR_ADVANCED_DIGITAL_LOGIC
 	bool "Advanced Digital Logic"
 
@@ -79,6 +83,13 @@
        select PLATFORM
        select PLATFORM_SUPPORT_64BIT
 
+config PLATFORM_ASUS_A8V_E_SE
+       bool "ASUS A8V-E SE"
+       depends VENDOR_ASUS
+       depends COREBOOT_V2
+       select PLATFORM
+       select PLATFORM_SUPPORT_64BIT
+
 config PLATFORM_GA_2761GXDK
 	bool "GIGABYTE GA-2761GXDK"
 	depends VENDOR_GIGABYTE
Index: packages/filo/conf/asus_a8v-e_se-Config
===================================================================
--- packages/filo/conf/asus_a8v-e_se-Config	(Revision 0)
+++ packages/filo/conf/asus_a8v-e_se-Config	(Revision 0)
@@ -0,0 +1,17 @@
+USE_GRUB = 1
+MENULST_FILE = "hda2:/boot/grub/menu.lst"
+IDE_DISK = 1
+IDE_DISK_POLL_DELAY = 1
+SLOW_SATA = 1
+USB_DISK = 1
+VGA_CONSOLE = 1
+PC_KEYBOARD = 1
+SERIAL_CONSOLE = 1
+SERIAL_IOBASE = 0x3f8
+SERIAL_SPEED = 115200
+FSYS_EXT2FS = 1
+FSYS_ISO9660 = 1
+ELTORITO = 1
+SUPPORT_PCI = 1
+PCI_BRUTE_SCAN = 1
+LINUX_LOADER = 1
Index: packages/coreboot-v2/asus_a8v-e_se.mk
===================================================================
--- packages/coreboot-v2/asus_a8v-e_se.mk	(Revision 0)
+++ packages/coreboot-v2/asus_a8v-e_se.mk	(Revision 0)
@@ -0,0 +1,41 @@
+ifeq ($(CONFIG_PLATFORM),y)
+ifeq ($(CBV2_TAG),)
+$(error You need to specify a version to pull in your platform config)
+endif
+endif
+
+CBV2_PATCHES= 
+
+# ifeq ($(CONFIG_PAYLOAD_KERNEL),y)
+# 	CBV2_CONFIG = Config-lab.lb
+# 	CBV2_PAYLOAD_FILE_EXT = elf.lzma
+# endif
+# 
+# ifeq ($(CONFIG_PAYLOAD_LAB),y)
+# 	CBV2_CONFIG = Config-lab.lb
+# 	CBV2_PAYLOAD_FILE_EXT = elf.lzma
+# endif
+
+
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT)
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
+
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
+
+$(SOURCE_DIR)/$(CBV2_TARBALL): 
+	@ echo "Fetching the coreboot code..."
+	@ mkdir -p $(SOURCE_DIR)/coreboot
+	@ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+	$(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+	> $(CBV2_FETCH_LOG) 2>&1
+
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT)
+	@ mkdir -p $(OUTPUT_DIR)
+	@ cat $(CBV2_OUTPUT) > $@
+	
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean