DRAM CS[0] base 0x00000000 size 64MB DRAM Total size 64MB [8192kB@ff800000] Flash: 8 MB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M): Done *** Warning - bad CRC, using default environment Soc: MV88F5182 Rev 2 CPU: ARM926 (Rev 0) running @ 500Mhz SysClock = 166Mhz , TClock = 166Mhz USB 0: host mode USB 1: host mode PCI 0: PCI Express Root Complex Interface PCI 1: Conventional PCI, speed = 33000000 Hit any key to stop autoboot: 0 Marvell>> loadb ## Ready for binary (kermit) download to 0x00100000 at 115200 bps... @CLocal command? gerkmit -i -s nb4 gerkmit: not found @CLocal command? gkermit -i -s nb4 G-Kermit CU-1.00, Columbia University, 1999-12-25 Escape back to your local Kermit and give a RECEIVE command. KERMIT READY TO SEND... ## Total Size = 0x003070c4 = 3174596 Bytes ## Start Addr = 0x00100000 Un-Protect Flash Bank # 1 Kernel Size = 0 Copy to Flash... done Protect Flash Bank # 1 Marvell>> bootm ## Booting image at 00100000 ... Image Name: NetBSD kernel image Image Type: ARM Unknown OS Kernel Image (uncompressed) Data Size: 3174532 Bytes = 3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... NetBSD/evbarm (kuroboxarm) booting ... Loaded initial symtab at 0xc0296280, strtab at 0xc02bcccc, # entries 9795 pmap_postinit: Allocated 35 static L1 descriptor tables Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.58 (DNS323) #34: Thu Apr 10 23:18:18 VLAST 2008 leo@pardus:/home/leo/dns323/nbsd-src/src/src/sys/arch/evbarm/compile/obj/DNS323 total memory = 65536 KB avail memory = 60100 KB mainbus0 (root) cpu0 at mainbus0: ARM926EJ-S rev 0 (ARM9EJ-S core) cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled cpu0: 32KB/32B 1-way Instruction cache cpu0: 32KB/32B 1-way write-back-locking-C Data cache orion0 at mainbus0: Marvell MV88F5182 SoC Rev. A0 Orion1 orion0: CPU Clock 500.000 MHz SysClock 166.666 MHz TClock 166.664 MHz oriontmr0 at orion0 addr 0xf1020300-0xf10203ff: Marvell Orion Timer com0 at orion0 addr 0xf1012000-0xf101201f irq 3: ns16550a, working fifo com0: console mvsata0 at orion0 addr 0xf1080000-0xf1085fff irq 29: Marvell Serial-ATA Host Controller (SATAHC) mvsata0: 1hc, 2port/hc atabus0 at mvsata0 channel 0 atabus1 at mvsata0 channel 1 ehci0 at orion0 addr 0xf1050000-0xf1051fff irq 17: Marvell Orion USB 2.0 Interface usb0 at ehci0: USB revision 2.0 uhub0 at usb0 uhub0: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 ehci1 at orion0 addr 0xf10a0000-0xf10a1fff irq 12: Marvell Orion USB 2.0 Interface usb1 at ehci1: USB revision 2.0 uhub1 at usb1 uhub1: vendor 0x0000 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 orionpex0 at orion0 addr 0xf1040000-0xf1041fff irq 11: Marvell Orion PCI Express Interface pci0 at orionpex0 Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci0 dev 0 function 0 not configured oriongbe0 at orion0 addr 0xf1072000-0xf1073fff: Marvell Orion Gigabit Ethernet Controller oriongbe0: Ethernet address 00:1c:f0:0a:12:34 makphy0 at oriongbe0 phy 8: Marvell 88E1111 Gigabit PHY, rev. 2 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto oriontwsi0 at orion0 addr 0xf1011000-0xf101101f: Orion TWSI controller iic0 at oriontwsi0: I2C bus m41t80rtc0 at iic0 addr 0x68: M41T80 Real-time Clock g760a0 at iic0 addr 0x3e: G760A Fan Controller mvsata0 port 0: device present, speed: 3.0Gb/s wd0 at atabus0 drive 0: wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors boot device: root on wd0f dumps on wd0b init: copying out path `/sbin/init' 11 Thu Apr 10 23:28:53 UTC 2008 Starting file system checks: /dev/rwd0f: file system is clean; not checking Setting tty flags. Setting sysctl variables: Starting network. Hostname: blackbox IPv6 mode: host Configuring network interfaces:. Adding interface aliases: Building databases: dev, utmp, utmpx done Starting syslogd. Checking for core dump... savecore: /netbsd: kvm_openfiles: /netbsd: No such file or directory Apr 10 23:28:57 blackbox savecore: /netbsd: kvm_openfiles: /netbsd: No such file or directory Mounting all filesystems... Clearing temporary files. Creating a.out runtime link editor directory cache. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 /etc/rc: WARNING: No swap space configured! Starting virecover. Starting local daemons:. Updating motd. postfix/postfix-script: warning: not owned by group maildrop: /usr/sbin/postqueue postfix/postfix-script: warning: not owned by group maildrop: /usr/sbin/postdrop postfix/postfix-script: warning: not set-gid or not owner+group+world executable: /usr/sbin/postqueue postfix/postfix-script: warning: not set-gid or not owner+group+world executable: /usr/sbin/postdrop postfix/postfix-script: starting the Postfix mail system Starting inetd. Starting cron. Thu Apr 10 23:29:03 UTC 2008 NetBSD/evbarm (blackbox) (console) login: root Apr 10 23:31:04 blackbox login: ROOT LOGIN (root) ON console Last login: Wed Sep 9 10:48:47 2009 on console Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.58 (DNS323) #34: Thu Apr 10 23:18:18 VLAST 2008 Welcome to NetBSD! This system is running a development snapshot of the NetBSD operating system, also known as NetBSD-current. It is highly possible for it to contain serious bugs, regressions, broken features or other problems. Please bear this in mind and use the system with care. You are encouraged to test this version as thoroughly as possible. Should you encounter any problem, please report it back to the development team using the send-pr(1) utility (requires a working MTA). If yours is not properly set up, use the web interface at: http://www.NetBSD.org/support/send-pr.html Thank you for helping us test and improve NetBSD. Terminal type is vt100. We recommend creating a non-root account and using su(1) for root access. blackbox# uname -a NetBSD blackbox 4.99.58 NetBSD 4.99.58 (DNS323) #34: Thu Apr 10 23:18:18 VLAST 2008 leo@pardus:/home/leo/dns323/nbsd-src/src/src/sys/arch/evbarm/compile/obj/DNS323 evbarm blackbox#