linuxbox:~ # ssh 10.100.0.1
The authenticity of host '10.100.0.1 (10.100.0.1)' can't be established.
RSA key fingerprint is 08:54:25:1e:32:ec:5b:ee:6f:ca:d9:47:fc:dc:79:f3.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.100.0.1' (RSA) to the list of known hosts.
root@10.100.0.1's password:
~ $ dmesg
Linux version 2.6.21-hh20-omap1 (root@linuxbox) (gcc version 4.1.2) #165 PREEMPT Wed Apr 23 21:24:07 CEST 2008
CPU: OMAP850 [41069263] revision 3 (ARMv5TEJ), cr=00053177
Machine: HTC Artemis
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
  DMA zone: 128 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 16256 pages, LIFO batch:3
  Normal zone: 0 pages used for memmap
OMAP0850 revision 1 handled as 07xx id: 7a0358f77690040f
SRAM: Mapped pa 0x20000000 to va 0xd0000000 size: 0x100000
htcartemis_map_io done.
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets
Built 1 zonelists.  Total pages: 16256
Kernel command line: root=/dev/ram0 ramdisk_size=20504 init=/linuxrc
htcartemis_init_irq.
Clocks: ARM_SYSST: 0x1040 DPLL_CTL: 0x2fb3 ARM_CKCTL: 0x6506
Clocking rate (xtal/DPLL1/MPU): 13.0/201.5/201.5 MHz
Total of 96 interrupts in 3 interrupt banks
OMAP730 GPIO hardware
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 41768KB available (2252K code, 239K data, 124K init)
Calibrating delay loop... 100.35 BogoMIPS (lpj=501760)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
HTC Artemis init.
OMAP730 Watchdog seems to be activated, disabling it for now.
trying to enable USB.
USB_EN to 0 after 0 tries.
Invalid pin mux index: 145 (25)
[<c002c390>] (dump_stack+0x0/0x14) from [<c003c41c>] (omap_cfg_reg+0x40/0x2d0)
[<c003c3dc>] (omap_cfg_reg+0x0/0x2d0) from [<c001220c>] (omap_init_devices+0xb4/0xe4)
[<c0012158>] (omap_init_devices+0x0/0xe4) from [<c00088c0>] (init+0x94/0x1b8)
 r4 = C0021C44
[<c000882c>] (init+0x0/0x1b8) from [<c0049a2c>] (do_exit+0x0/0x878)
 r7 = 00000000  r6 = 00000000  r5 = 00000000  r4 = 00000000
Invalid pin mux index: 146 (25)
[<c002c390>] (dump_stack+0x0/0x14) from [<c003c41c>] (omap_cfg_reg+0x40/0x2d0)
[<c003c3dc>] (omap_cfg_reg+0x0/0x2d0) from [<c0012214>] (omap_init_devices+0xbc/0xe4)
[<c0012158>] (omap_init_devices+0x0/0xe4) from [<c00088c0>] (init+0x94/0x1b8)
 r4 = C0021C44
[<c000882c>] (init+0x0/0x1b8) from [<c0049a2c>] (do_exit+0x0/0x878)
 r7 = 00000000  r6 = 00000000  r5 = 00000000  r4 = 00000000
OMAP DMA hardware version 1
DMA capabilities: 000c0000:00000000:01ff:003f:007f
Initializing OMAP McBSP system
omap_dsp_init() done
MUX: Setting register MMC_DAT0
      OMAP730_IO_CONF_2 (0xfffe1078) = 0xc1100020 -> 0xc1100020
      OMAP730_IO_CONF_2 (0xfffe1078) = 0xc1100020 -> 0xc1100120
USB: hmc 4, usb2 alt 0 wires
i2c_omap i2c_omap.1: bus 1 rev2.2 at 100 kHz
tps65010: version 2 May 2005
i2c_omap i2c_omap.1: controller timed out
i2c_omap i2c_omap.1: controller timed out
i2c_omap i2c_omap.1: controller timed out
tps65010: no chip?
omap1_spi100k omap1_spi100k.1: registered master spi1
omap1_spi100k omap1_spi100k.2: registered master spi2
omap1_spi100k omap1_spi100k.2: registered child spi2.0
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Time: mpu_timer2 clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 20480K
Power Management for TI OMAP.
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered
io scheduler deadline registered (default)
omapfb: configured for panel htcartemis-toppoly
omapfb: LCDC initialized
Console: switching to colour frame buffer device 30x40
omapfb: Framebuffer initialized. Total vram 155648 planes 1
omapfb: Pixclock 5302 kHz hfreq 18.7 kHz vfreq 57.9 Hz
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0: autoconf (0x0000, 0xfefb0000): LOOP test failed (00) type=unknown
Trying to free nonexistent resource <00000000fffb0000-00000000fffb0007>
ttyS0: autoconf (0x0000, 0xfefb0800): LOOP test failed (00) type=unknown
Trying to free nonexistent resource <00000000fffb0800-00000000fffb0807>
RAMDISK driver initialized: 1 RAM disks of 20504K size 1024 blocksize
i2c /dev entries driver
udc: OMAP UDC driver, version: 4 October 2004 (iso)
udc: OMAP UDC rev 3.6
udc: hmc mode 4, integrated transceiver
udc: fifo mode 3, 648 bytes not used
usb0: Ethernet Gadget, version: May Day 2005
usb0: using omap_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep3in-int
usb0: MAC 82:7c:ab:80:7d:33
usb0: HOST MAC 42:23:5b:e3:f0:62
usb0: RNDIS ready
ads7846 spi2.0: touchscreen, irq 236
ads7846 spi2.0: read 0x0= fffe
ads7846 spi2.0: read 0x2= 5c5c0000
ads7846 spi2.0: read 0x4= fc5c
ads7846 spi2.0: read 0x6= fdfd
ads7846 spi2.0: read 0x8= 0000
ads7846 spi2.0: read 0xa= d8d80000
ads7846 spi2.0: read 0xc= 7fd8
ads7846 spi2.0: read 0xe= fefe0000
ads7846 spi2.0: write-0 d3
ads7846 spi2.0: read 0x0= fffe
ads7846 spi2.0: read 0x2= 5c5c0000
ads7846 spi2.0: read 0x4= fc5c
ads7846 spi2.0: read 0x6= fdfd
udc: USB reset done, gadget ether
ads7846 spi2.0: read 0x8= 0000
ads7846 spi2.0: read 0xa= d8d80000
ads7846 spi2.0: read 0xc= 7fd8
ads7846 spi2.0: read 0xe= fefe0000
ads7846 spi2.0: read-0 d8
ads7846 spi2.0: read-0 d8
ads7846 spi2.0: read 0x0= fffe
ads7846 spi2.0: read 0x2= 5c5c0000
ads7846 spi2.0: read 0x4= fc5c
ads7846 spi2.0: read 0x6= fdfd
ads7846 spi2.0: read 0x8= 0000
ads7846 spi2.0: read 0xa= d8d80000
ads7846 spi2.0: read 0xc= 7fd8
ads7846 spi2.0: read 0xe= fefe0000
ads7846 spi2.0: write-0 e7
ads7846 spi2.0: read 0x0= fffe
ads7846 spi2.0: read 0x2= 5c5c0000
ads7846 spi2.0: read 0x4= fc5c
ads7846 spi2.0: read 0x6= fdfd
ads7846 spi2.0: read 0x8= 0000
ads7846 spi2.0: read 0xa= d8d80000
udc: USB reset done, gadget ether
ads7846 spi2.0: read 0xc= 7fd8
ads7846 spi2.0: read 0xe= fefe0000
ads7846 spi2.0: read-0 d8
ads7846 spi2.0: read-0 d8
ads7846 spi2.0: read 0x0= fffe
ads7846 spi2.0: read 0x2= 5c5c0000
ads7846 spi2.0: read 0x4= fc5c
ads7846 spi2.0: read 0x6= fdfd
ads7846 spi2.0: read 0x8= 0000
udc: USB reset done, gadget ether
ads7846 spi2.0: read 0xa= d8d80000
ads7846 spi2.0: read 0xc= 7fd8
ads7846 spi2.0: read 0xe= fefe0000
ads7846 spi2.0: write-0 90
ads7846 spi2.0: read 0x0= fffe
ads7846 spi2.0: read 0x2= 5c5c0000
ads7846 spi2.0: read 0x4= fc5c
ads7846 spi2.0: read 0x6= fdfd
ads7846 spi2.0: read 0x8= 0000
ads7846 spi2.0: read 0xa= d8d80000
ads7846 spi2.0: read 0xc= 7fd8
ads7846 spi2.0: read 0xe= fefe0000
ads7846 spi2.0: read-0 d8
ads7846 spi2.0: read-0 d8
input: ADS784x Touchscreen as /class/input/input0
evbug.c: Connected device: "ADS784x Touchscreen", spi2.0/input0
omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
omap_rtc: already running
Bluetooth: Virtual HCI driver ver 1.2
Bluetooth: HCI UART driver ver 2.2
usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
omap_rtc omap_rtc: setting the system clock to 2000-01-04 00:04:49 (946944289)
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 20480KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 124K