Thu Apr 24 18:49:06 2008
panic(cpu 0 caller 0x001A8C8A): Kernel trap at 0x0019ae57, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00d02000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x410f3ed0, ECX: 0x04b04a04, EDX: 0x00000000
CR2: 0x00000000, EBP: 0x410f2c18, ESI: 0x00000000, EDI: 0x00000002
EFL: 0x00010202, EIP: 0x0019ae57, CS:  0x00000004, DS:  0x0019000c
Error code: 0x00000000

Backtrace, Format - Frame : Return Address (4 potential args on stack) 
0x410f2a88 : 0x12b0f7 (0x4581f4 0x410f2abc 0x133230 0x0) 
0x410f2ad8 : 0x1a8c8a (0x461720 0x19ae57 0xe 0x460ed0) 
0x410f2bb8 : 0x19ece5 (0x410f2bcc 0x410f2c18 0x19ae57 0xe) 
0x410f2bc4 : 0x19ae57 (0xe 0x6c40048 0xc 0x410f000c) 
0x410f2c18 : 0x416a57c4 (0x0 0xfe9ae360 0x534500 0x1) 
0x410f3c68 : 0x2161ab (0x0 0x4b04a04 0x2 0xc0286938) 
0x410f3cb8 : 0x214457 (0x4b04a04 0x2 0xc0286938 0x410f3ed0) 
0x410f3dd8 : 0x2144da (0x4c61990 0xc0286938 0x410f3ed0 0x400be70) 
0x410f3df8 : 0x38ff99 (0x4c61990 0xc0286938 0x410f3ed0 0x400be70) 
0x410f3e58 : 0x39006a (0x4c61990 0xc0286938 0x410f3ed0 0x400be70) 
0x410f3e78 : 0x3653a7 (0x469bfd0 0xc0286938 0x410f3ed0 0x410f3f50) 
0x410f3e98 : 0x38bd28 (0x469bfd0 0xc0286938 0x410f3ed0 0x410f3f50) 
0x410f3f78 : 0x3dcf13 (0x400be70 0x3cbcba0 0x3cbcbe4 0x0) 
0x410f3fc8 : 0x19f1c3 (0x3a777e8 0x0 0x1a20b5 0x3a7784c) 
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb007ff48
      Kernel loadable modules in backtrace (with dependencies):
         com.cisco.nke.ipsec(2.0.1)@0x416a3000->0x41711fff

BSD process name corresponding to current thread: configd

Mac OS version:
9C7010

Kernel version:
Darwin Kernel Version 9.2.2: Tue Mar  4 21:17:34 PST 2008; root:xnu-1228.4.31~1/RELEASE_I386
System model name: MacBookPro1,2 (Mac-F42DBEC8)

----

Model: MacBookPro1,2, BootROM MBP12.0061.B03, 2 processors, Intel Core Duo, 2.16 GHz, 2 GB
Graphics: kHW_ATIr520Item, ATY,RadeonX1600, spdisplays_pcie_device, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x86), 1.3.4
Bluetooth: Version 2.1.0f14, 2 service, 1 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST910021AS, 93.16 GB
Parallel ATA Device: MATSHITADVD-R   UJ-846
USB Device: Built-in iSight, Micron, high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA

----

Panic at startup, first restart following installation of 
Cisco VPN Client 4.9.01.0100
unofficially sourced from 
ftp://ftp.rrzn.uni-hannover.de:21//pub/local/vpn/macosx/10.4-10.5/vpnclient-darwin-4.9.01.0100-universal-k9.dmg
referred from 
http://www.macupdate.com/info.php/id/10317/cisco-vpn-client 

Verbose mode at startup, AFAIR the panic occurred immediately after the following lines were presented: 

> CiscoVPN : checking if we are already attached to interface: vmnet8
> 
> CiscoVPN : no, not yet attached to interface: vmnet8

Judging from a later dmesg view of things, the two lines that might  normally follow are:

> CiscoVPN : interface: vmnet8, filter attached.
> CiscoVPN : current MTU for vmnet8 is 1500, saving it.